Featured Machines

Mit, 3.5" Bar, 12" Chk, 16.5" Max Dia, 28" Length, 3000 RPM, 30HP, 12 Tools, Tool Presetter, Tail, Chip
Matrix, 4" Bar, 12" Chuck, 81" Length, 50HP, 2500 RPM, 12 Tools, Tail, Chip
MSG-803, 1.37" Bar, 6" Chuck, 6000 RPM, 10 Tools, 10 HP, Chip Conveyor, Chucker (No Tailstock)
Fanuc 0i Mate-TC, 1,63" Bar, 6" Chuck, 6000 RPM, 8 Tools + Gang Tool Slide, 7.5 HP, APC, Chip
Fanuc 0i, 3" Bar, 10" Chuck, 3500 RPM, 12/24 Tools, 30 HP, 30" Length, 14.8" Max Dia, Y-Axis, Tailstock, Chip, Tool Presetter
M730BM Control, 19.7" Plts, 28.28.33", Full 4th Axis, 12000 RPM, CAT 40 Big-Plus, 60 tools, Probes, Chip, TSC
Fanuc 0i Mate-TC, 1.63" Bar, 8" Chuck, 6000 RPM, 8 Tools & Gang Tool Slide, 7.5 HP, APC, Chip
Fanuc 21iTB, 2.5" Bar, 8" Chuck, 4500 RPM, 12 Tools, 20 HP, Parts Catcher, Tailstock, Box Ways
8" Chuck, 3" Bar, Sub-Spindle, C & Y-Axis Milling, Tool Presetter, Parts Catcher, Chip Conveyor, Barfeed
40.26.25", 7500 RPM, 30 SMTC, 30 HP, Cat 50, 26" Extended Y Travel, Fourth Axis Interface, Chip Auger, Remote Jog Handle
Fanuc 0i, 2.5" Bar, 8" Chuck, 4500 RPM, 12 Tools, 20 HP, Parts Catcher, Tool Presetter, Tailstock
15.13.18", .003-.006" Layer Thickness, 240 IPS Speed, 0.9-1.8 L/hr Build Rate, Build Setup 4.4, 3i Sinter SLS System
OSP-200LA, (2) 28" Chucks, (2) 12 Tools, 60 HP, 1000 RPM, 31.5" Max Dia, Twin Spindles & Twin Turrets, (2) Chips
12" Chuck, 3" Bar, C-Axis Milling, Parts Catcher, Tool Presetter, Chip Conveyor, Mist Collector
16.14.16", (4) Layer Thicknesses, (2) Build & Support Canisters, CleanStation SRS II, Fused Deposition Modeling
WinMax, 26.14.18", 10000 RPM, 16 Tools, 15 HP, Cat 40, SMTC, Max Classic, DXF Software, Ultipocket, Ultinet
12" Chuck, 3" Bar, C-axis Milling, 2 Speed Gearbox, Tool Presetter, Chip Conveyor, Tailstock, Mist Collector
40.20.25", 7500 RPM, 24 SMTC, Cat 40, 20 HP, Gearbox, Probes, Intuitive Programming, Programmable Coolant, Auger
Ultimax IV, 30.20.24", 10000 RPM, 24 Tools, 17.6 HP, Cat 40, Fourth Axis Interface, SMTC
88 HS, 30.16.20", 10000 RPM, 21 Tools, 15 HP, Cat 40, Box Ways, High Torque Spindle, Rigid Tapping
10" Chuck, 3" Bar, 12 Tools, 3400 RPM, 30 HP, Y-Axis, Tailstock, Tool Presetter, Chip Conveyor
Ultimax, 42.24.24", 15000 RPM, Cat 40, 24 Tools, Fourth Axis, SMTC, Chip Conveyor
G-Tech 840Di, 11.8" Plt (11), 20.22.20", Fourth Axis, 240 Tools, 20000 RPM, BT-40 Big Plus, 20 HP, 11 Pallet Changer, Chip Conveyor, ATLM
Fanuc 160is-M, 40.20.20", 10000 RPM, Cat 50, 20 Tools, 30 HP, TSC 1000 psi, Fourth Axis Rotary Table
64.32.30", 7500 RPM, 30 SMTC, 30 HP, Cat 50, TSC, TR-310 5-Axis Trunnion, Probes, Scales, Gearbox
Fanuc 21iMB, 40.20.25", 6000 RPM, Cat 50, 25HP, 30 Tools, CTS, Rigid Tap, Chip, MPG
Fanuc 16iM, 44.22.22", 10000 RPM, 40 Tools, Cat 40, 25 HP, TSC, Chip, ATLM, Gearbox, Box Ways
MAPPS 3 FANUC FS-31iA5 Control, 3.1" Bar, (2) 10" Chucks, 12,000 RPM, 30 HP, C, Y, & B Axis Milling, Lower Turret, 100 Tools, TSC, ATLM
40.20.25", 10000 RPM, Cat 40, 20 HP, 24 SMTC, TSC, Fourth Axis Int, Gearbox, Auger,
ANILAM 4200T, 25" chuck, Tailstock, Steady Rest, Chip Conveyor
FANUC 31i, 24.8" pallets, 39.32.33" , 15,000RPM, 120 Tools, 1 Degree, TSC, Chip
32 MP, 40.20.20" Travel, 10,000 RPM, 21 Tools, 20 HP, Cat 40, VH-65 Fourth Axis, High Torque Spindle, Cool Power
T32-2, 2.75" Bar, 12" Chuck, 60" Length, 15.75" Max Dia, 3000 RPM, 40 HP, 12D/24P Turret, Tool Eye, Chip, Tailstock